Hostraid Setup Flow; Migration Of Hard Disk Drive (Migration) - NEC Express5800/120Rh-2 N8100-1061F User Manual

5-56 Installing the Operating System with Express Setup

HostRAID Setup Flow

The flowchart below shows the HostRAID system setup procedure.
*1 You can create RAID by using the NEC EXPRESSBUILDER. In this case, only you need to do is to
set the HostRAID feature to "Enabled" by using SCSISelect Utility.
*2 For Windows Server 2003 x64 Edition: Adaptec Storage Manager User's Guide
For Windows Server 2003 and Windows 2000: Adaptec Storage Manager - Browser Edition User's
Guide
You may view or print these documents from the NEC EXPRESSBUILDER CD-ROM.

Migration of Hard Disk Drive (Migration)

When you want the system SCSI hard disk drive using SCSI controller on the I/O board migrate to
RAID1 of SCSI HosRAID, the "Migration" must be executed.
For details, please refer to "Express5800 SCSI HostRAID Migration procedure (Windows)" of
online documents.
Start
Is HostRAID used as
boot disk?
Yes
Enable the HostRAID
feature and create RAID by
using SCSISelect Utility
Refer to SCSISelect
Utility User's Manual.
Install driver
(install OS).
See Appendix D or E of
this guide.
Update system.
See this chapter.
Install ASMBE or ASM.
See ASMBE/ASM User's
*2
Guide .
Install Standby/Hibernation
Lock driver.
See appendix of
ASMBE/ASM User's
*2
Guide .
End
*1