Appendix F
Installing Windows 2000
This section explains how to install the Windows 2000 without using Express Setup tool.
BEFORE INSTALLING WINDOWS 2000
Please read carefully the following information BEFORE commencing your Windows 2000
Installation.
Optional Board Supported by NEC EXPRESSBUILDER
NEC EXPRESSBUILDER CD-ROM attached to your system supports the following optional
boards:
NOTE:
disk ("OEM-FD for Mass storage device"), except ones listed below,
see "Exceptional setup" and "Installing Optional Mass Storage Driver"
of "Configuration Diskette Creator" in Chapter 6.
Supporting installation of OS in NEC EXPRESSBUILDER
– N8103-80F Disk Array Controller (SCSI 1ch)
– N8103-81F Disk Array Controller (SCSI 2ch)
– N8103-86 Disk Array Controller (0ch)
– Adaptec HostRAID(SCSI) (Controller on the I/O board)
Other optional boards
– N8103-56 SCSI Controller
– N8103-65F SCSI Controller
– N8103-75 SCSI Controller
– N8103-95 SCSI Controller
– N8190-126 SCSI Controller
If you want to install the other boards by using a driver floppy