NEC Express5800/120Rh-2 N8100-1061F User Manual page 104

4-8 Configuring Your Server
Advanced
Option
Memory Configuration
PCI Configuration
Peripheral Configuration
Advanced Chipset Control
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Memory/Processor Error
SATA RAID Enable
Parameter Description
– Displays Memory Configuration
submenu.
– Displays PCI Configuration
submenu.
– Displays Peripheral Configuration
submenu.
– Displays Advanced Chipset Control
submenu.
[Enabled] When disabled, the BIOS will display
the NEC logo during POST. Press
Disabled
Esc to switch to the POST execution
screen.
[No] Select "Yes" if you want to clear the
system configuration data during the
Yes
next boot. Automatically reset to
"No" in the next boot.
[Auto] Sets power on Numlock state.
On
Off
[Boot] If "Halt" is selected, the boot is
stopped when POST error occurs.
Halt
[Disabled] Cannot be used in this system.
Enabled
Your Setting
[ ]: Factory-set