11/07 Rev. 4.03-01
Device Types, Application
•
•
•
•
•
•
Internal Options
•
•
External
Options
•
•
•
•
USER-/SERVICE MANUAL
AP 7.t
Intended purpose: Monotone printing of textile labelling materials for thermal
and thermotransfer processes
Processing roll material
Resolution: the AP 7.t is optionally available with 203 or 300 dpi resolution
Print speed up to 200 mm/sec (8"/s) with the AP 7.t (203dpi) or
up to 150 mm/s (6"/s) with the AP 7.t (300dpi).
Print width up to 104 mm with the AP 7.t (203dpi) or
105 mm with the AP 7.t (300dpi).
Interfaces: RS -232, USBCentronics, Ethernet
Options
...should be factory-fitted or installed by a service engineer:
Reflex Sensor Kit: Light barrier fitting that apart from the transmission sensor,
also contains a reflex sensor.
I/O board: RS- 422/485 interface, signal interface
...do not require any special alterations to the printer:
Cutter
TCS (Textile Cutter-Stacker)
(External) rewinder for material rolls with 38 mm (1.5"), 75 mm (3") or 100 mm
(4") cores
Keyboard for standalone operation
AP 7.t
2
Technical Data