Installing Phone Manager - Avaya IP Office 3.2 Applications Installation & Administration Manual

Installing Phone Manager

Overview
The installation process is divided into the following steps.
1. Planning forms
Intended to assist in the installation of Phone Manager at site. The forms contain areas to record
information about the site, IP Office system, Key Dongle details and a listing of the Phone
Manager mode being used by extension number. For more information, see Planning Forms.
2. Remove previous versions of the software.
It is recommended that any previous installation of applications from the IP Office User suite are
removed before installation. For more information, see Removing Old Phone Manager Software.
3. Install the Phone Manager software.
The process assumes that the user's PC is connected to the LAN and can see the IP Office. For
more information, see Installing Phone Manager Software.
Applications Installation & Administration Manual
IP Office 3.2
Phone Manager
15-601133 Issue 1 (7 June 2006)
Page 43