Visonic PowerMaster-10 G2 User Manual page 35

MENUS AND FUNCTIONS
1 For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
This option allows you to program the events to be reported. To program telephone numbers, click the
or
3
The display shows the currently selected option (indicated by a
Using the
telephones numbers according to the options provided in the tables below:
PowerMaster-10 G2
Event Group Option
alarms+alerts
alarms
alerts
disable report
PowerMaster-30 G2
Event Group Option
disable report
all
all (-op/cl)
all (-alerts)
alarms
alerts
op/cl
all
Note: " " means all events including the L. BAT and AC FAIL trouble messages (PowerMaster-30 G2 only).
4
The display shows the currently selected option (indicated by a
Using the
numbers according to the options provided in the table below:
Event Group Option
disable report
all
all (-op/cl)
all (-alerts)
alarms
alerts
op/cl

5
The symbol now appears next to the new selected option.
6
a. The display shows the phone number currently programmed in this location (for example,
1032759641). The cursor blinks on the first digit of the code.
b. If the location is free the display will be blank ( - - - - ).
7
You can move the cursor to the next or previous location (digit) using the
8
Within the private telephone menu, you can now repeat steps 7 – 9 to program or edit another phone number.
Within the SMS menu you can now repeat steps 8 - 10 to program or edit another SMS phone number.
To end this session and return to previous menu options, press the
9
You can select between: "
10
You can select between:
enable 2-way
" – enables 2-way voice communication with private telephones.
"
disable 2-way
" " - disables 2-way voice communication with private telephones.
11
You can select between:
by single ack
" – an acknowledge signal from only a single telephone will stop the reporting process.
"
by all ack
" – an acknowledge signal from all telephones is required to stop the reporting process.
"
34
Additional Information (section B.11)
button until the display reads the desired option.
or buttons you can now select the events you wish to be reported to private
Events to be reported
Alarm and alert messages
Alarm messages
Alert messages
No message will be reported
Events to be reported
No message will be reported
All messages
All messages, except arming & disarming
All messages, except alerts
Alarm messages only
Alert messages only
Arming and disarming (Open/close) only
or buttons you can now select the events you wish to be reported to SMS
Events to be reported
No message will be reported
All messages
All messages, except arming & disarming
All messages, except alerts
Alarm messages only
Alert messages only
Arming and disarming (Open/close) only
1 attempt 2 attempts
"; "

symbol), for example, "

symbol), for example, "
3 attempts 4 attempts
"; " "; "
D-303223 PowerMaster-10/30 G2 User's Guide
disable report
disable report
or button.
button.
".
".
".