Message Playback - Visonic PowerMaster-10 G2 User Manual

SPEECH AND SOUND CONTROL
Once the last of the boxes disappears, RECORDING ENDED will be displayed.
When you release the button, the display will revert to the normal status-displaying mode, but will also indicate
that a message is waiting. For example:
READY HH:MM
(alternating)
READY MSG
To check your own message, listen to it within one minute from the end of recording (see the next section -
Message Playback). This way the MSG indication will not be erased.

Message Playback

To listen to a message left by another user of the system:
Click and listen. PLAY will be displayed and the message will be played back over the built-in
loudspeaker. When the playback ends, the display will revert to the normal status-displaying mode. If more than
1 minute elapsed after recording, the MSG indication will disappear.
14 D-303223 PowerMaster-10/30 G2 User's Guide