E2. Wireless; E3. Electrical - Visonic PowerMaster-10 G2 User Manual

APPENDICES
PowerMaster-10 G2
Real Time Clock The control panel keeps and displays time and
(RTC) date. This feature is also used for the log file by
providing the date and time of each event
Battery Test Once every 10 seconds

E2. Wireless

PowerMaster-10 G2
PowerG – 2-way synchronized Frequency
RF Network
Hopping (TDMA / FHSS)
433 – 434
Frequency bands
(MHz)
Hopping 8
frequencies
Region Worldwide
Encryption AES-128
Note: AES-128 bit encryption for
communication between control unit and
initiating devices is not suitable as a means of
Encrypted Line Security in UL Listed product.
* For UL Listed product, enable this frequency band.

E3. Electrical

PowerMaster-10 G2
External AC/AC Europe: 230VAC 50Hz input, 9VAC 700mA
adaptor output.
USA: 120VAC 60Hz input, 9VAC 1000mA
output.
External AC/DC -
adaptor
Internal AC/DC Internal switching power supply:
Input: 100-240VAC, 0.12 A Max.
Output: 7.5VDC, 1.2A Max.
Current Drain Approx. 70 mA standby, 1200 mA peak at full
load.
Low Battery 4.8 V
Threshold
Backup Battery
4.8V 1300 mAh, rechargeable NiMH battery
Pack
pack, p/n GP130AAM4YMX, manufactured by
GP or equivalent.
4.8V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAM4YMX, manufactured by
GP or equivalent (special order).
4.8V 2200 mAh, rechargeable NiMH battery
pack, p/n GP220AAM4YMX, manufactured by
GP only. For UL Listed product, use this
battery only.
Caution! Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the
manufacturer's instructions.
Note: For compliance with UL standards the
battery backup period shall exceed 24 hours
and 12 hours for compliance with CE
standards.
56
912 – 919*
868 - 869
4 50
Europe North
America and
selected
countries
PowerMaster-30 G2
The control panel keeps and displays time and
date. This feature is also used for the log file by
providing the date and time of each event
Once every 10 seconds
PowerMaster-30 G2
PowerG – 2-way synchronized Frequency
Hopping (TDMA / FHSS)
433 – 434
868 - 869
8 4
Worldwide Europe
AES-128
Note: AES-128 bit encryption for
communication between control unit and
initiating devices is not suitable as a means of
Encrypted Line Security in UL Listed product.
PowerMaster-30 G2
NA
External (wall-mounted) switching power
supply 100VAC to 240VAC, 50/60 Hz, 0.5A /
12.5 VDC, 1.6A
Internal switching power supply:
Input: 100-240VAC, 0.5A
Output: 12.5 VDC, 1.6A.
Approx. 40 mA standby, 1400 mA at full load.
7.2 V (6-cell battery pack)
9.6 V (8-cell battery pack)
Backup Battery Options:
Maximum external devices current (1)
1300 mAh 1800 mAh
6 Battery 8-Battery
Pack (2) Pack (3)
4h 210mA 300mA
8h 90mA 160 mA
12h 45mA 90 mA
24h 0mA 25 mA
36h (no backup) 5mA
48h (no backup) (no backup) 0mA
1. Devices that are connected between 12V
terminal and GND of PowerMaster-30 G2 that
includes internal GSM and proximity reader.
2. 7.2V 1300 mAh, rechargeable NiMH battery
pack, p/n GP130AAH6BMX, manufactured
by GP only. For UL Listed product, use this
battery only.
3. 9.6V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAH8BMX, manufactured
D-303223 PowerMaster-10/30 G2 User's Guide
912 – 919*
50
North
America and
selected
countries
2200 mAh
8-Battery
Pack (4)
380mA
200mA
120 mA
45mA
15mA