Arming In The Latchkey Mode; Initiating Alarms; Initiating Panic Alarm - Visonic PowerMaster-10 G2 User Manual

Fully supervised wireless alarm control system
Hide thumbs Also See for PowerMaster-10 G2:
Table of Contents

Advertisement

Note: When forced arming is carried out, the buzzer "protests" by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can silence this signal by pressing the arming button again.
If forced arming is enabled and you wish to arm the system when NOT READY is displayed, proceed as shown:
PRESS
[Enter code]
(to mute the buzzer)
Vacate the premises
ARM indicator lights during the armed state.
Forced arming "HOME" is performed in a similar manner, as follows:
PRESS
[Enter code]
(to mute the buzzer)
Go to interior zone
ARM indicator flashes during the armed state.

Arming in the Latchkey Mode

This mode, if enabled by the installer, is useful for a parent at work who wants to be sure that his children have
returned from school and have disarmed the system. A special "latchkey" message will be sent out when the
system is disarmed by a "latchkey user".
Latchkey users are holders of user codes or users of keyfob transmitters 5 through 8 (PowerMaster-10 G2) /
user codes 23-32 (PowerMaster-30 G2). The latchkey message is considered an alert and not an alarm, and is
therefore sent to the private telephones programmed by the user as targets for alert messages.
Latchkey arming is possible only when you arm "AWAY". To arm in the Latchkey mode, proceed as follows:
PRESS
(Within 2 seconds)
Vacate the premises
Note: Latchkey must be enabled by your installer.
ARM indicator lights during the armed state.

Initiating Alarms

Following are various methods that may be used for initiating alarms.

Initiating Panic Alarm

You can generate a panic alarm manually in the disarmed and armed states. The sequence will be as shown:
D-303223 PowerMaster-10/30 G2 User's Guide
OPERATING THE POWERMASTER SYSTEM
RESULTING DISPLAY
ENTER CODE
_ _ _ _
Code
ARMING AWAY
PLEASE EXIT NOW
(Exit delay)
AWAY
Remember: Forced arming compromises security!!
RESULTING DISPLAY
ENTER CODE
_ _ _ _
Code
ARMING HOME
PLEASE EXIT NOW
(Exit delay)
HOME
HH:MM
RESULTING DISPLAY
ARMING AWAY
ARMING LATCHKEY
(alternating)
PLEASE EXIT NOW
(Exit delay)
AWAY
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermaster-30 g2

Table of Contents