Configuring Virtual Component Hmcp - Altigen MaxACD Administrator Manual

Chapter 11: Component Configuration
Figure 11-1. SIP Signaling Channel Configuration dialog box
The number of configured channels and licensed channels are displayed.
MaxACD is set by default to support 60 SIP extension channels. You can change the
number of SIP extension channels and tie-trunk channels. The maximum number
possible depends of the system CPU performance, call volume, and usage. If a high
performance machine is used as the MaxACD server, the number of channels can be
more than 1000. If you change the numbers in this dialog box, you must shut down and
restart the switching and gateway services for this change to take effect. When the
services restart, the new configuration appears in the Currently Configured Channels
fields.
The SIP Trunking Configuration button in this dialog box opens the SIP Trunking
Configuration dialog box. (See "SIP Trunk Properties" on page 102.)

Configuring Virtual Component HMCP

Note: An AltiGen HMCP Media Server license is required to activate an HMCP media
server.
92
MaxACD Administrator Manual
If you change the number
of SIP extensions or tie
trunk channels, you must
stop and restart the
switching and gateway
services.