Managing Automatic Remote Configuration Download
Network Components
The network components required for the Automatic Remote Configuration download process are:
•
DHCP server (mandatory).
•
TFTP file server (mandatory).
•
Primary FTP/SFTP server (mandatory).
•
Secondary FTP/SFTP server (optional).
Information Provided by DHCP Server
When the network interfaces or ports on the switch are ready, a DHCP client is automatically configured
for the default VLAN 1. The following information is acquired from the DHCP server:
•
IP address of the Network Gateway or Router.
•
TFTP file server address.
•
Instruction file name and location.
•
Dynamic IP address for the OmniSwitch (valid only for initial bootup process).
Information Provided by Instruction File
The TFTP server address information is received from the DHCP server. The OmniSwitch downloads the
instruction file from the TFTP server. The instruction file provides the following information:
•
Firmware version and file location.
•
Configuration file name and location.
•
Debug configuration file name and location.
•
Script file name and location.
•
Primary FTP/SFTP file server address / type / username.
•
Secondary FTP/SFTP file server address / type / username.
For more details on all the component files downloaded during the automatic remote configuration
download process, see -
OmniSwitch AOS Release 6 Network Configuration Guide
"Download Component Files" on page -10.
July 2010
Overview
page 8-5