Show Currently Used Configuration - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Managing Redundancy in a Stack and CMM

Show Currently Used Configuration

In a chassis with a redundant CMM, the display for the currently running configuration tells the user if the
primary and secondary CMMs are synchronized.
To check the directory from where the switch is currently running and if the primary and secondary
CMMs are synchronized, enter the following command on a stack:
-> show running-directory
CONFIGURATION STATUS
Running CMM
CMM Mode
Current CMM Slot
Running configuration
Certify/Restore Status
SYNCHRONIZATION STATUS
Flash Between CMMs
Running Configuration
Stacks Reload on Takeover: ALL STACKs (SW Activation)
To check the directory from where the switch is currently running, enter the following command on a
chassis:
-> show running-directory
CONFIGURATION STATUS
Running CMM
CMM Mode
Current CMM Slot
Running configuration
Certify/Restore Status
SYNCHRONIZATION STATUS
Running Configuration
NIs Reload on Takeover
The command returns the name of the directory the switch is currently running from (working or certi-
fied), and also displays the CMM which is currently controlling the switch (primary or secondary). It also
displays whether the working and certified directories are the same and whether a synchronization is
needed between the primary and secondaryCMM. In addition, the command output displays how many
modules in the stack will be reloaded in the event of a management module takeover. Options include
NONE, ALL, or a list of specific modules. Refer to the following section for additional information on NI
module behavior during a redundant CMM takeover.
The show running-directory
page 5-30
: PRIMARY,
: DUAL CMMs,
: 1,
: WORKING,
: CERTIFY NEEDED
: SYNCHRONIZED,
: NOT AVAILABLE,
: PRIMARY,
: MONO CMMs,
: A,
: WORKING,
: CERTIFY NEEDED
: NOT SYNCHRONIZED,
: 3
command is described in detail in the OmniSwitch CLI Reference Guide.
OmniSwitch AOS Release 6 Switch Management Guide
Managing CMM Directory Content
July 2010