Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 102

Omniswitch series
Table of Contents

Advertisement

SNMP Overview
No. Trap Name
22
dvmrpNeighborLoss
dvmrpInterfaceLocalAddress—The IP address this system will use as a source address on this interface. On
unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interfaces on the
system.
dvmrpNeighborState—State of the neighbor adjacency.
23
dvmrpNeighborNotPruning
dvmrpInterfaceLocalAddress—The IP address this system will use as a source address on this interface. On
unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interfaces on the
system.
dvmrpNeighborCapabilities—This object describes the neighboring router's capabilities. The leaf bit indi-
cates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports
pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace
bit indicates that the neighbor can handle mtrace requests.
page 3-16
Objects
Family
dvmrpInterface-
ipmr
LocalAddress
dvmrpNeigh-
borState
dvmrpInterface-
ipmr
LocalAddress
dvmrpNeigh-
borCapabili-
ties
OmniSwitch AOS Release 6 Switch Management Guide
Using SNMP
Description
A 2-way adjacency relationship
with a neighbor has been lost.
This trap is generated when the
neighbor state changes from
"active" to "one-way," "ignor-
ing" or "down." The trap is sent
only when the switch has no
other neighbors on the same
interface with a lower IP address
than itself.
A non-pruning neighbor has been
detected in an implementation-
dependent manner. This trap is
generated at most once per gen-
eration ID of the neighbor. For
example, it should be generated
at the time a neighbor is first
heard from if the prune bit is not
set. It should also be generated if
the local system has the ability to
tell that a neighbor which sets the
prune bit is not pruning any
branches over an extended period
of time. The trap should be gen-
erated if the router has no other
neighbors on the same interface
with a lower IP address than
itself.
July 2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 6

Table of Contents