Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 130

SNMP Overview
No. Trap Name
138 sdpBindSdpStateChangeProcessed
sdpNotifySdpId—The SDP that experienced the state change.
139 unused
.
140 unused
141 unused
142 ddmTemperatureThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTemperature—The temperature, in tenths of a degree celcius.
143 ddmVoltageThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5)
ddmSupplyVoltage—The voltage, in tenths of a volt.
144 ddmCurrentThresholdViolated
page 3-44
Objects Family
sdp
N/A N/A
N/A N/A
N/A N/A
ifIndex
ddmNotifica-
tionType
ddmTempera-
ture
ifIndex port
ddmNotifica-
tionType
ddmSupply-
Voltage
ifIndex, port
ddmNotifica-
tionType
ddmTxBiasCur-
rent
OmniSwitch AOS Release 6 Switch Management Guide
Using SNMP
Description
This trap is sent when the agent
has finished processing an SDP
state change event, and that the
operating status of all the
affected SDP Bindings has been
updated accordingly.
This trap is sent when an SFP/
XFP/SFP+ temperature has
crossed any threshold or
reverted from previous threshold
violation for a port represented
by ifIndex. It also provides the
current realtime value of SFP/
XFP/SFP+ temperature.
This trap is sent when SFP/XFP/
SFP+ supply voltage has crossed
any threshold or reverted from
previous threshold violation for a
port represented by ifIndex. It
also provides the current realtime
value of SFP/XFP/SFP+ supply
voltage.
This trap is sent when if an SFP/
XFP/SFP+ Tx bias current has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
bias current.
July 2010