Additional Process Notes - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Overview

Additional Process Notes

1. Once the switch obtains an IP interface from the DHCP server, remote access via SSH is automatically
configured to allow remote access in case of any download errors during the Auto Configuration process.
2. It's not recommended to have the 'write memory'command in the script file if a configuration file is
downloaded. This will cause the boot.cfg file to be overwritten with the commands in the script file.
3. After the successful download of the script file, the DHCP IP interface is automatically deleted.
However, SSH access remains enabled. Use the 'no aaa authentication ssh' command to disable SSH
connectivity if desired.
page 8-8
Managing Automatic Remote Configuration Download
OmniSwitch AOS Release 6 Network Configuration Guide July 2010