SNMP Overview
No. Trap Name
77
vRtrIsisIDLenMismatch
vRtrIsisFieldLen—The System ID Field length.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.
78
vRtrIsisMaxAreaAddrsMismatch
vRtrIsisMaxAreaAddress—The maximum number of area addresses in the PDU.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.
79
vRtrIsisOwnLSPPurge
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
80
vRtrIsisSequenceNumberSkip
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
page 3-28
Objects
Family
vRtrIsis-
isis
FieldLen
vRtrIsisIfIndex
vRtrIsisPDUF-
ragment
vRtrIsisMax-
isis
AreaAddress,
vRtrIsisIfIndex
vRtrIsisPDUF-
ragment
vRtrIsisIfIndex,
isis
vRtrIsisTrapL-
SPID
vRtrIsisSystem-
Level
vRtrIsisTrapL-
isis
SPID
vRtrIsisIfIndex
vRtrIsisSystem-
Level
OmniSwitch AOS Release 6 Switch Management Guide
Using SNMP
Description
This trap is sent when when a
PDU with a different System ID
Length is received. The notifica-
tion includes the index to identify
the circuit for the PDU and the
header of the PDU, which may
help a network manager identify
the source of the problem.
This trap is sent when a PDU
with a different Maximum Area
Addresses value is recieved. The
notification includes the header
of the packet, which may help a
network manager identify the
source of the problem.
This trap is sent when sent when
a PDU is received with the sys-
tem ID and zero age. This notifi-
cation includes the circuit Index
if available, which may help a
network manager identify the
source of theproblem.
If an LSP without System ID and
different contents is received, the
LSP may be reissued with a
higher sequence number.
If two Intermediate Systems are
configured with the same System
ID, the sequence number is
increased and this notification is
sent.
July 2010