Making A New Directory - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Managing System Files
If you specify a path as part of the
the specified path.
-> ls /flash/
Listing Directory /flash:
drw 1024 Nov
-rw 276 Nov
-rw 4890749 Oct 21 21:43 cs_system.pmd
-rw 256 Nov
-rw 64000 Nov
drw 1024 Nov
drw 1024 Nov
drw 1024 Nov
-rw 222 Nov
-rw 524288 Oct 31 10:51 u-boot.bin
-rw 834497 Oct 31 10:50 miniboot.uboot
-rw 64000 Nov
-rw 719 Nov
-rw 199567 Nov
63308800 bytes free

Making a New Directory

To make a new directory use the
wise, the new directory will be created in your current directory. The syntax for this command requires a
slash (/) and no space between the path and the new directory name. Also, a slash (/) is required at the
beginning of your path specification.
Note. Your login account must have write privileges to execute the
The following command makes a new directory in the working directory on an OmniSwitch:
-> mkdir /flash/working/newdir1
This drawing represents the content of the /flash/working directory after the new directory is added.
OmniSwitch AOS Release 6 Switch Management Guide
ls or dir command, your screen will list the contents of the directory at
8 08:30 WORKING/
8 09:59 boot.params
8 09:57 random-seed
8 09:59 swlog1.log
8 08:31 certified/
8 08:29 NETWORK/
8 08:29 SWITCH/
8 09:59 boot.cfg.1.err
8 10:56 swlog2.log
6 12:07 test020
5 11:16 rule930.txt
mkdir command. You may specify a path for the new directory. Other-
Flash Directory
Working Directory
(Files)
newdir1 Directory
Ksecu.img
Kbase.img
boot.cfg
mkdir command.
July 2010
File and Directory Management
page 1-11