Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 316

Configuring the Switch With WebView
2
Complete the fields, then click Apply. The new configuration takes effect immediately and the new
entry appears in the table.
3
Repeat steps 1 and 2 to add additional entries.
Modifying an Existing Entry
To modify an existing entry:
1
Click on the checkbox to the left of the entry on the Configuration page and click Modify. The Modify
window appears (e.g., Modify IP Static Route). The current configuration is displayed in each field.
2
Modify the applicable field(s), then click Apply. If successful, the Modify window disappears. The
new configuration takes effect immediately and the modified entry appears in the table. If there is an error,
the window will remain and an error message is displayed.
3
Repeat the procedure to modify additional entries.
page 12-14
Add Window
Modify Window
OmniSwitch AOS Release 6 Switch Management Guide
Using WebView
July 2010