Listing Your Current Login Session - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Using the CLI

Listing Your Current Login Session

In order to list information about your current login session, you may either use the who command and
identify your login by your IP address or you may enter the whoami command. The following will
display:
-> whoami
Session number = 4
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 148.211.11.02,
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
This display indicates that the user is currently logged in as session number 4, under the username
"admin," using a Telnet interface, from the IP address of 148.211.11.02.
Session Number
User name
Access type
Access port
Ip Address
Read-only rights
Read-Write rights
Read-only domains
Read-only families
Read-Write domains
Read-Write families
OmniSwitch AOS Release 6 Switch Management Guide
= 0x00000000 0x00000000,
= 0xffffffff 0xffffffff,
= None,
= ,
= All ,
The session number assigned to the user.
User name.
Type of access protocol used to connect to the switch.
Switch port used for access during this session.
User IP address.
The hexadecimal value of privileges configured for the user.
The hexadecimal value of privileges configured for the user.
The command domains available with the user's read-only access. See
the table beginning on
The command families available with the user's read-only access. See
the table beginning on
The command domains available with the user's read-write access. See
the table beginning on
The command families available with the user's read-write access. See
the table beginning on
July 2010
page 6-22 for a listing of valid domains.
page 6-22 for a listing of valid families.
page 6-22 for a listing of valid domains.
page 6-22 for a listing of valid families.
Multiple User Sessions
page 6-21