Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 105

Omniswitch series
Table of Contents

Advertisement

Using SNMP
No. Trap Name
33
slbTrapOperStatus
slbTrapInfoEntityGroup—The entity group inside SLB management.
slbTrapInfoOperStatus—The operational status of an SLB cluster or server.
slbTrapInfoClusterName—A change occurred in the operational status of an SLB entity.
slbTrapInfoServerIpAddr—The IP address of a server.
Note: This trap is not supported.
34
ifMauJabberTrap
ifMauJabberState—The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent MUST always
return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state
is unknown; for example, when it is being initialized. If the MAU is not jabbering the agent returns noJabber(3).
This is the "normal" state. If the MAU is in jabber state the agent returns the jabbering(4) value.
35
sessionAuthenticationTrap
sessionAccessType—The access type of the session.
sessionUserName—The user name of the user logged-in.
sessionUserIpAddress—The IP address of the user logged-in.
36
trapAbsorptionTrap
trapAbsorStamp—The time stamp of the absorbed trap.
trapAbsorTrapId—The trap identifier of the absorbed trap.
trapAbsorCounter—The number of the iterations of the absorbed trap.
trapAbsorTime—The time stamp of the last iteration.
37
alaStackMgrDuplicateSlotTrap
alaStackMgrSlotNINumber—The numbers allocated for the stack NIs are from 1 to 8.
Note: This trap is not supported on OmniSwitch 9000 switches.
OmniSwitch AOS Release 6 Switch Management Guide
Objects
Family
slbTrapInfoEn-
load
tityGroup
balancing
slbTrapInfoOp-
erStatus
slbTrapInfo-
ClusterName
slbTrapInfoS-
erverIpAddr
ifMauJabber-
interface
State
sessionAc-
session
cessType
sessionUser-
Name
sessionUserI-
pAddress
sessionAuth-
Failure
trapAbsorStamp
none
trapAbsor-
TrapId
trapAbsor-
Counter
trapAbsorTime
alaStack-
chassis
MgrSlotNI-
Number
July 2010
SNMP Overview
Description
A change occurred in the opera-
tional status of the server load
balancing entity.
This trap is sent whenever a man-
aged interface MAU enters the
jabber state.
An authentication failure trap is
sent each time a user authentica-
tion is refused.
The absorption trap is sent when
a trap has been absorbed at least
once.
Two or more slots claim to have
the same slot number.
page 3-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 6

Table of Contents