Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 131

Using SNMP
No. Trap Name
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxBiasCurrent—The current Transmit Bias Current of the SFP/XFP in 10s of milli-Amperes (mA).
145 ddmTxPowerThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxOutputPower—The current Output Power of the SFP/XFP in 10s of milli-Watts (mW).
146 ddmRxPowerThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmRxOpticalPower—The current Received Optical Power of the SFP/XFP in 10s of milli-Watts (mW).
147 pimBsrElectedBSRLostElection
pimBsrElectedBSRAddressType—The address type of the elected BSR.
pimBsrElectedBSRAddress—The unicast address of the elected BSR.
pimBsrElectedBSRPriority—The priority value for the elected BSR for this address type. Higher values for
this object indicate higher priorities (0 - 255).
148 pimBsrCandidateBSRWinElection
pimBsrCandidateBSR ElectedBSR—Indicates whether the local router is the elected BSR for this zone.
149 esmViolationRecoveryTimeout
ifIndex—The interface index.
esmViolationRecoveryNotificationType—The trap type for monitored violation-recovery parameters.
OmniSwitch AOS Release 6 Switch Management Guide
Objects Family
ifIndex port
ddmNotifica-
tionType
ddmTxOutput-
Power
ifIndex, port
ddmNotifica-
tionType
ddmRxOpti-
calPower
pimBsrElected pim
BSRAddress
Type,
pimBsrElected
BSRAddress,
pimBsrElected
BSRPriority
pimBsrCandi- pim
dateBSR
ElectedBSR
ifIndex, port
esmViolation-
Recovery
Notification-
Type
July 2010
SNMP Overview
Description
This trap is sent when an SFP/
XFP/SFP+ Tx output power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
output power.
This trap is sent when an SFP/
XFP/SFP+ Rx optical power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Rx
optical power
This trap is sent when the current
E-BSR loses an election to a new
Candidate-BSR.
This trap is sent when a C-BSR
wins a BSR Election.
This trap is sent when a user port
is re-enabled after an esm viola-
tion recovery timeout.
page 3-45