Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 129

Using SNMP
No. Trap Name
custId—The customer identifier.
svcId—The service identifier.
svcVpnId—The the VPN ID assigned to this service.
svcAdminStatus—The desired state of the service.
svcOperStatus—The the operational state of the service.
134 sapStatusChanged
custId—The customer identifier.
svcId—The service identifier.
svcVpnId—The the VPN ID assigned to this service.
sapPortId—The ID of the access port where the SAP is defined.
sapEncapValue—The value of the label used to identify the SAP on the access port specified by sapPortId.
sapAdminStatus—The desired state of the SAP.
sapOperStatus—The operating state of the SAP.
sapOperFlags—The condition(s) that affect the operating status of this SAP..
135 sdpBindStatusChanged
custId—The customer identifier.
svcId—The service identifier.
svcVpnId—The the VPN ID assigned to this service.
sdpBindId—The SDP Binding identifier.
sdpBindAdminStatus—The desired state of the Service-SDP binding.
sdpBindOperStatus—The operating status of the Service-SDP binding.
sdpBindOperFlags—The conditions that affect the operating status of this SDP Bind.
136 sdpStatusChanged
sdpId—The SDP identifier.
sdpAdminStatus—The desired state of the SDP.
sdpOperStatus—The operating state of the SDP.
137 sapPortStateChangeProcessed
sapNotifyPortId—The ID of the port that experienced the state change.
OmniSwitch AOS Release 6 Switch Management Guide
Objects Family
custId sap
svcId
svcVpnId
sapPortId
sapEncapValue
sapAdminStatus
sapOperStatus
sapOperFlags
custId sdp
svcId
svcVpnId
sdpBindId
sdpBindAdmin-
Status
sdpBindOper-
Status
sdpBindOper-
Flags
sdpId sdp
sdpAdminSta-
tus
sdpOperStatus
sapNotifyPortId sap
July 2010
SNMP Overview
Description
This trap is sent when there is a
change in the administrative or
operating status of an SAP.
This trap is sent when there is a
change in the administrative or
operating status of an SDP Bind-
ing.
This trap is sent when there is a
change in the administrative or
operating status of an SDP.
This trap is sent when the agent
has finished processing an access
port state change event, and that
the operating status of all the
affected SAP's has been updated
accordingly.
page 3-43