Using Secure Shell
Note. Although Secure Shell FTP has commands similar to the industry standard FTP, the underlying
protocol is different. See
ple.
Closing a Secure Shell FTP Session
To terminate the Secure Shell FTP session, issue the
-> exit
Connection to 11.133.30.135 closed.
This display indicates the Secure Shell FTP session with IP address 11.133.20.135 is closed. The user is
now logged into the OmniSwitch as a local device with no active remote connection.
Note. Establishing and closing the Secure Shell FTPv6 connection is similar to that of the Secure Shell
FTP connection.
page 2-18
Chapter 1, "Managing System Files,"
OmniSwitch AOS Release 6 Switch Management Guide
for a Secure Shell FTP application exam-
exit
command. The following will display:
Logging Into the Switch
July 2010