Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 79

Logging Into the Switch
The following example describes how a Secure Shell interface is established from the local OmniSwitch
to IP address
10.222.30.125
1
Log on to the OmniSwitch and issue the
identify the IP address or hostname for the device to which you are connecting. The following command
establishes a Secure Shell FTP interface from the local OmniSwitch to IP address 10.222.30.125.
-> sftp 10.222.30.125
login as:
Note. If SFTP is not enabled, use the
2
You must have a login and password that is recognized by the IP address you specify. When you enter
your login, the device you are logging in to, will request your password as shown here.
-> sftp 10.222.30.125
login as: rrlogin2
rrlogin2's password for keyboard-interactive method:
Note. You can use the
start an SFTPv6 session. It is mandatory to specify the name of the particular IPv6 interface, if the
SFTPv6 server has been specified using its link-local address. After logging in, you will receive the sftp>
prompt. You may enter a question mark (?) to view available Secure Shell FTP commands and their defi-
nitions as shown here.
sftp>?
Available commands:
cd path
lcd path
chmod mode path
help
get remote-path [local-path]
lls [path]]
ln oldpath newpath
lmkdir path
lpwd
ls [path]
mkdir path
put local-path [remote-path]
pwd
exit
quit
rename oldpath newpath
rmdir path
rm path
symlink oldpath newpath
version
?
OmniSwitch AOS Release 6 Switch Management Guide
:
sftp
scp-sftp command to enable it.
sftp6 command followed by the IPv6 address or hostname of the SFTPv6 server to
Change remote directory to 'path'
Change local directory to 'path'
Change permissions of file 'path' to 'mode'
Display this help text
Download file
Display local directory listing
Symlink remote file
Create local directory
Print local working directory
Display remote directory listing
Create remote directory
Upload file
Display remote working directory
Quit sftp
Quit sftp
Rename remote file
Remove remote directory
Delete remote file
Symlink remote file
Show SFTP version
Synonym for help
CLI command. The command syntax requires you to
July 2010
Using Secure Shell
page 2-17