Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 120

SNMP Overview
No. Trap Name
98 alaPimInvalidJoinPrune
alaPimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
alaPimInvalidRegisterAddressType—The address type stored in alaPimInvalidRegisterOrigin, alaPimIn-
valid RegisterGroup and alaPimInvalidRegisterRp. If no unexpected Register messages are received, the onject
is set to "Unknown".
alaPimInvalidJoinPruneOrigin—The source address of the last unexpected Join/Prune message received
alaPimInvalidJoinPruneGroup—The IP multicast group address carried in the last unexpected Join/Prune
message received
alaPimInvalidJoinPruneRp—The RP address carried in the last unexpected Join/Prune message received
alaPimNeighborUpTime—The time since this PIM neighbor (last) became a neighbor of the local router.
99 alaPimRPMappingChange
alaPimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
alaPimGroupMappingPrecedence—The value for alaPimGroupMappingPrecedence to be used for this static
RP configuration. This allows fine control over which configuration is overridden by this static configuration
100 alaPimInterfaceElection
alaPimInterfaceAddressType—The address type of the PIM interface.
alaPimInterfaceAddress—The primary IP address of this router on this PIM interface.
page 3-34
Objects Family
alaPimGroup- ipmr
MappingPim-
Mode
alaPimInvalid-
JoinPruneAd-
dressType
alaPimInvalid-
JoinPruneOri-
gin
alaPimInvalid-
JoinPrune-
Group
alaPimInvalid-
JoinPruneRp
alaPimNeigh-
borUpTime
alaPimGroup- ipmr
MappingPim-
Mode
alaPimGroup-
MappingPre-
cedence
alaPimInter- ipmr
faceAd-
dressType
alaPimInter-
faceAddress
OmniSwitch AOS Release 6 Switch Management Guide
Using SNMP
Description
This trap is sent when an invalid
PIM Join/Prune message is
received.
The notification is generated
whenever the PIM Invalid Join
Prune Messages Recieved
counter is incremented, subject to
the rate limit specified by the
PIM Invalid Join/Prune Notifica-
tion Period.
This trap is sent when a change is
detected to the active RP map-
ping on the device.
The notification is generated
whenever the PIM RP Mapping
Change Count is incremented,
subject to the rate limit specified
by PIM RP Mapping Change
Notification Period
This trap is sent when a new DR
or DR has been elected on a net-
work.
The notification is generated
whenever the counter PIM Inter-
face Elections Win Count is
incremented, subject to the rate
limit specified by PIM Interface
Election Notification Period.
July 2010