Alcatel-Lucent OmniSwitch AOS Release 6 Manual page 127

Using SNMP
No. Trap Name
126 vRtrLdpGroupIdMismatch
vRtrLdpNotifyLocalGroupID—The local Group ID.
vRtrLdpNotifyRemoteGroupID—The remote Group ID.
127 mplsXCup
mplsXCIndex—The MPLS Index.
mplsInSegmentIfIndex—The interface index for the incoming MPLS interface.
mplsInSegmentLabel—The incoming label for the segment.
mplsOutSegmentIndex—The outgoing label for the segment.
mplsXCAdminStatus—The desired operational status of the segment (Up/Down/Testing).
mplsXCOperStatus—The actual operational status of the segment (up(1), down(2), testing(3), unknown(4),
dormant(5), notPresent(6), lowerLayerDown(7).
128 mplsXCdown
mplsXCIndex—The MPLS Index.
mplsInSegmentIfIndex—The interface index for the incoming MPLS interface.
mplsInSegmentLabel—The incoming label for the segment.
mplsOutSegmentIndex—The outgoing label for the segment.
mplsXCAdminStatus—The desired operational status of the segment (Up/Down/Testing).
mplsXCOperStatus—The actual operational status of the segment (up(1), down(2), testing(3), unknown(4),
dormant(5), notPresent(6), lowerLayerDown(7).
129 vRtrMplsStateChange
OmniSwitch AOS Release 6 Switch Management Guide
Objects Family
vRtrLdpNotify- ldp
Local-
GroupID
vRtrLdpNoti-
fyRemote-
GroupID
mplsXCIndex mpls-lsr
mplsInSegmen-
tIfIndex
mplsInSeg-
mentLabel
mplsOutSeg-
mentIndex
mplsXCAdmin-
Status
mplsXCOper-
Status
mplsXCIndex, mpls-lsr
mplsInSegmen-
tIfIndex
mplsInSeg-
mentLabel
mplsOutSeg-
mentIndex
mplsXCAdmin-
Status
mplsXCOper-
Status
vRtrID, mpls
vRtrMplsGen-
eralAdmin-
State
vRtrMplsGen-
eralOperState
July 2010
SNMP Overview
Description
This trap is sent when there is a
mismatch of local and remote
group IDs.
This trap is generated when one
of the configured cross-connect
entries is about to leave the down
state and transition into some
other state (but not into the "Not
Present" state).
This trap is sent when one of the
configured cross-connect entries
is about to enter the down state
from some other state (but not
from the "Not Present" state).
This trap is sent when the MPLS
module changes state.
page 3-41