Home Page - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

Configuring the Switch With WebView
4
Click the "Next" button to continue with the Certificate Import Wizard process. The "Certificate
Store" window displays.
5
Select "Place all certificates in the following store" and click on the "Browse" button. This will
display a list of certificate stores.
6
Select "Trusted Root Certification Authorities" from the list of stores and continue with the wizard
installation process. A "Security Warning" window will display containing a warning about installing
the certificate.
7
Click the "Yes" button in the "Security Warning" window to finish installing the certificate. After
the certificate is installed, the browser window no longer displays the certificate error message.

Home Page

The first page displayed for each feature is the Home Page (e.g., IP Home). The Home Page describes the
feature and provides an overview of that feature's current configuration. If applicable, home pages display
the feature's current configuration and can also be used to configure global parameters. Each Home Page
also provides a Site Map (shown below), which displays all of the configuration options available for that
feature. These are the same configuration options available in the drop-down menus at the top of the page.
Click to dis-
play feature
Home
Page.
page 12-10
IP Home Page
OmniSwitch AOS Release 6 Switch Management Guide
Using WebView
Displays
Site Map
Feature
Overview
July 2010