List Of Details - Mitsubishi Electric Melservo-J3 Series MR-J3-B Instruction Manual

5. PARAMETERS

5.4.2 List of details

No. Symbol
PD01 For manufacturer setting
Do not change this value by any means.
PD02
PD03
PD04
PD05
PD06
PD07 *DO1 Output signal device selection 1 (CN3-13)
Any input signal can be assigned to the CN3-13 pin.
0 0
The devices that can be assigned in each control mode are those that have the symbols
indicated in the following table.
Setting
00
01
02
03
04
05
06
07
08
09
Note 1. It becomes always OFF in speed control mode.
2. It becomes SA in speed control mode.
3. For manufacturer setting
Never change this setting.
Output signal device selection 2 (CN3-9)
PD08 *DO2
Any input signal can be assigned to the CN3-9 pin.
The devices that can be assigned and the setting method are the same as in parameter
No. PD07.
0 0 0
PD09 *DO3 Output signal device selection 3 (CN3-15)
Any input signal can be assigned to the CN3-15 pin.
The devices that can be assigned and the setting method are the same as in parameter
No. PD07.
0 0 0
Name and Function
Select the output device of the CN3-13 pin.
Device Setting
Always OFF
For manufacturer
setting (Note 3)
RD 0C
ALM 0D
INP (Note 1)
MBR
DB
TLC
WNG 12 to 1F
BWNG 20 to 3F
Select the output device of the CN3-9 pin.
Select the output device of the CN3-15 pin.
Device
0A Always OFF (Note 2)
For manufacturer
0B
setting (Note 3)
ZSP
For manufacturer
setting (Note 3)
For manufacturer
0E
setting (Note 3)
0F CDPS
For manufacturer
10
setting (Note 3)
11 ABSV (Note 1)
For manufacturer
setting (Note 3)
For manufacturer
setting (Note 3)
5 - 25
Initial Setting
Unit
Value Range
0000h
0000h
0000h
0000h
0000h
0000h
0005h Refer to
Name
and
function
column.
0004h Refer to
Name
and
function
column.
0003h Refer to
Name
and
function
column.