Cable/Connector Sets - Mitsubishi Electric Melservo-J3 Series MR-J3-B Instruction Manual

11. OPTIONS AND AUXILIARY EQUIPMENT
11. OPTIONS AND AUXILIARY EQUIPMENT
WARNING
CAUTION

11.1 Cable/connector sets

As the cables and connectors used with this servo, purchase the options indicated in this section.
Before connecting any option or peripheral equipment, turn off the power and wait
for 15 minutes or more until the charge lamp turns off. Then, confirm that the
voltage between P( ) and N( ) is safe with a voltage tester and others.
Otherwise, an electric shock may occur. In addition, always confirm from the front
of the servo amplifier whether the charge lamp is off or not.
Use the specified auxiliary equipment and options. Unspecified ones may lead to a
fault or fire.
11 - 1