Mitsubishi Electric Melservo-J3 Series MR-J3-B Instruction Manual page 404

Print Data *Manual Number
Jul., 2007 SH(NA)030051-C Section 3.10.2(3)
Section 3.10.2(3) (b)
Section 3.11.3(1)
Section 3.12
Section 4.3(2)
Chapter 5
Section 5.1.3
Section 5.1.8
Section 5.2.1
Section 5.3.1
Section 5.3.2
Section 5.3.3(2)
Section 6.3(1) (a)
Section 6.4(2)
Section 8.2
Section 9.1
Section 9.1(1) to (7)
Section 9.2(3)
Section 10.1
Section 10.2
Section 10.2(1)
Section 10.3
Section 10.5
Revision
: Change of Note1 and 3 in (a) 1) and 2), Addition and
change of (b) Terminal box inside diagrams, Addition
and change of corresponding motor models in the
cooling fan power supply list
: Change of servo motor diagram
: Change of Note1
: Deletion of power specification notation, addition of
Note
: Correction of indication "Ab." To "Ab .", Change of
description for "AC"
: Change of Basic setting parameters description
: Addition of setting available options
Addition of parameter setting due to addition of
regenerative option
: Deletion of POINT "This parameter cannot be used in
the speed control mode"
: Change of parameter No.PB17 from "for manufacturer
setting" to "Automatic setting parameter"
: Change of parameter No.PC06 from "for manufacturer
setting" to "function selection C-3"
: Addition of Note for parameter No.PC01, Change of
parameter No.PC06 from "for manufacturer setting" to
"function selection C-3", Addition of Note4 for
parameter No.PC09, Change of setting description for
parameter No.PC10
: Addition of Note4
: Addition of parameter No.PB07
: Change of description for Adjustment procedure Step5
: Addition of Note to the Definition for alarm (32),
Correction of the Cause4 for alarm (52)
: Addition of MR-J3-60B4 to 350B4
: Addition of mounting hole dimension diagram
: Description method change
: Change of graph from servo motor standards to servo
amplifier standards
Addition of MR-J3-60B4 to 350B4
: Addition of MR-J3-60B4 to 350B4 and corresponding
servo motor
: Addition of MR-J3-500B4 and 700B4
: Addition of MR-J3-500B4 and 700B4
Paragraphing of section 10.3.1 and section 10.3.2
Addition of dynamic brake time constant for servo motor
HF-SP524 / 1024 / 1524 / 2024 / 3524
Addition of section 10.3.2: Permissible inertia load
moment for MR-J3-60B4 to 350B4
: Addition of MR-J3-500B4 and 700B4
Addition of inrush current for MR-J3-60B4 to 350B4