Mitsubishi Electric Melservo-J3 Series MR-J3-B Instruction Manual page 219

11. OPTIONS AND AUXILIARY EQUIPMENT
(5) MR-J3BTCBL03M
This cable is a battery connection cable. Use this cable to retain the current position even if the detector
cable is disconnected from the servo amplifier.
(a) Connection of servo amplifier and servo motor
Servo amplifier
CN2
Battery
Note. For the detector cable, refer to (1), (2), (3) and (4) of this section.
Cable Model
MR-J3BTCBL03M Receptacle: 36210-0100PL
Shell kit: 536310-3200-008
(3M)
Or
Connector set: 54599-1019
(Molex)
Cable Model
Length
MR-J3BTCBL03M 0.3m
1)
MR-J3BTCBL03M
2)
3)
1) For CN2 Connector
Cable
For HF-MP HF-KP HF-SP servo motor
(Note)
Encoder cable
1) Junction Connector
Plug: 36110-3000PL
Shell kit: 36310-F200-008
(3M)
11 - 16
Application
Servo motor
2) For Battery Connector
Connector: DF3-2EP-2C
Contact: DF3-EP2428PCFA
(Hirose Denki)