Table of Contents
Advertisement
Reset STB/Output Assignments
To reset the previous, i.e., last stored, STB/output assignments, click on the Reset button at
the bottom of the Stream column. The STB/output assignments will be reset immediately.
Modify STB/Output Assignments
1. Click on the down arrow at the right of each STB field you wish to reassign, and select
from the drop-down list of options the appropriate STB number or N/C (no connection) for
the stream listed in the Stream column. Note that each STB can only be assigned to one
stream (DIRECTV) or one pair of streams (DISH Network).
2. When you have completed the assignments, click on the Set button at the bottom of the
STB column.
3. The system will display a pop-up window prompting for confirmation of the changes. Either:
• Click OK to confirm and apply the new assignments.
• Click Cancel to return to the MUX Setup screen without saving your changes.
If you successfully change the STB/output assignments, the system will display
below the MUX Setup screen.
206-4202
Configuration Options via GUI (Cont.)
Typical MUX
Setup Screen
33
Advertisement
Table of Contents
Troubleshooting
