LG CodePlus PIVD100R Installation & Setup Manual page 41

Configuration Options via Command Line (Cont.)
Change STB
This command enables you to switch to the STB Menu for another STB.
1. At the STB Command > prompt, type stb and press Enter.
2. At the Enter STB number [#]> prompt, type the number of the PIVD100R X-Port
connected to the STB for which you wish to view/modify configuration. Then, press Enter.
The system will identify the (newly) current STB and then display a command prompt, for
example:
Current STB: STB-3
STB-3 Command >
View STB Information
At the STB Command > prompt, type info and press Enter to display STB status and
configuration data (see examples below).
Example: STB Information (COM 23 Satellite STB)
STB-1 Info
===========
Output: 1
Receiver N: 029267852837
Card N: 002528994052
Activated: Yes
Channel: 215
Locked: Yes
Signal level: 93
Example: STB Information (ViP 222k Satellite STB)
STB-1 Info
===========
Output: 1
Receiver N: R0128390262-81
Card N: S1959036673-74
STB Model: ViP222k-HD
STB SW ver: X397RPDB-N
SW Update: 2012-03-05 11:56:00
Tuner 1
Channel: 2
Locked: Yes
Signal lvl: 75
Tuner 2
Channel: 5
Locked: Yes
Signal lvl: 80
206-4202
41