Reset The System; Line; Exit The Current Session - LG CodePlus PIVD100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
View the Pro:Idiom Key Checksum
At the P:I Command > prompt, type pchk and press Enter.
The Pro:Idiom key checksum is a 10 digit number that identifies the Pro:Idiom key file installed
on the PIVD100R, for example:
Pro:Idiom key checksum = 1521204805
Change the Pro:Idiom Password
1. At the P:I Command > prompt, type pip and press Enter.
2. At the Enter new PI password: prompt, type a new Pro:Idiom password and press
Enter.
The new password will take effect immediately.
Exit the Pro:Idiom Key Menu
At the P:I Command > prompt, type exit and press Enter to exit the Pro:Idiom Menu and
return to the PIVD100R Main Menu Command > prompt.

Reset the System

Note: This option is also available from the Setup Menu.
1. If not already logged in, log in to the PIVD100R as described on page 37.
2. At the Command > prompt, type reset and press Enter.
This will initiate a reset of the PIVD100R and may also initiate a reset of one or more STBs, if
required. Once the PIVD100R is reset (may take up to 90 seconds), it may then take up to 10
minutes for the PIVD100R to reestablish communication with the STBs. After the system reset,
the PIVD100R resumes normal operation.

Exit the Current Session

At the Command > prompt, type exit and press Enter to end the current session.
60
206-4202