Table of Contents
Advertisement
Configuration Options via GUI (Cont.)
(Continued from previous page)
3. The next step depends on whether you enabled or disabled NTP:
• If you enabled NTP, type the IP address of the NTP server in the NTP Server field.
• If you disabled NTP, complete the Date and Time fields to manually specify the date and
time for the PIVD100R. Click on the down arrow at the right of each field (Year, Month,
Day, Hour, Minute) to select the appropriate value from the drop-down list of options.
4. When you have completed the fields as required, click on the Set button at the bottom of
the Time Configuration section.
If you successfully changed the PIVD100R time configuration, the system will display
Information display will also show the updated information in the Time Zone and Current
Time fields, as applicable.
5. Click on the Reset button in the System Reset section of the System Setup screen if you
are ready to reset the system immediately (see "Reset the System" below for further
information).
Note: If you intend to modify additional configuration settings during the current session,
you may wait until all changes are complete before you reset the system.
Reset the System
1. Click on the Reset button in the System Reset section of the System Setup screen.
2. The system will display a pop-up window prompting for confirmation. Either:
• Click OK to continue.
• Click Cancel to return to the System Setup screen without resetting the PIVD100R.
If you opt to proceed, this will initiate a reset of the PIVD100R and may also initiate a reset
of one or more STBs, if required. Once the PIVD100R is reset (may take up to 90 seconds),
it may then take up to 10 minutes for the PIVD100R to reestablish communication with the
STBs. After the system reset, the PIVD100R resumes normal operation.
MUX Setup Options
The MUX Setup screen enables you to reset or reconfigure STB/output assignments. To
access the MUX Setup screen, click on MUX Setup in the options panel at the left of the
screen.
32
at the bottom of the System Information display. The System
206-4202
Advertisement
Table of Contents
Troubleshooting
