LG CodePlus PIVD100R Installation & Setup Manual page 53

Configuration Options via Command Line (Cont.)
(Continued from previous page)
4. After you type the port number, the system returns to the IP Output Command >
prompt. At the IP Output Command > prompt, type apply and press Enter to confirm
and apply the configuration data to the system.
The system will display confirmation before returning to the IP Output Command >
prompt, for example:
New IP outputs configuration is now active.
5. At the IP Output Command > prompt, type exit and press Enter to return to the Setup
Menu.
Set the Time Zone
Note: See "Set the Date and Time" on the following page for information on setting the date
and time for the PIVD100R.
1. At the Setup Command > prompt, type tz and press Enter.
The system displays the current time zone information for the PIVD100R and prompts you
to specify whether or not you wish to change the time zone.
Current time zone is: America/New York
Change the time zone? [y/n]:
2. Either:
• Type n and press Enter to return to the Setup Command > prompt without changing the
current time zone.
• Type y and press Enter to change the time zone. Then, continue with step 3.
3. The system will display the following prompt for a location, followed by a list of options:
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
At the #? prompt, type the number that corresponds to the appropriate option for your
location, and then press Enter.
4. The system will display the following prompt for a country, followed by a list of options:
Please select a country.
At the #? prompt, type the number that corresponds to the appropriate option for your
country, and then press Enter.
5. The system will display the following prompt for a region, followed by a list of options:
Please select one of the following time zone regions.
At the #? prompt, type the number that corresponds to the appropriate option for your
region, and then press Enter.
206-4202
(Continued on next page)
53