Update Menu Commands - LG CodePlus PIVD100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
Change the Login Password
1. At the Setup Command > prompt, type pwd and press Enter.
The system prompts for the current admin user password:
Changing password for admin
Old password:
2. Type the current password and press Enter. The system will then prompt you to type and
retype the new password:
New password:
Retype password:
3. Type and then retype the new password at the prompts. Press Enter after each entry.
Once you complete the Password fields successfully, the system displays confirmation:
Password for admin changed by admin.
Exit the Setup Menu
At the Setup Command > prompt, type exit and press Enter to exit the Setup Menu and
return to the PIVD100R Main Menu Command > prompt.
Reset the System
This command is also available from the PIVD100R Main Menu.
At the Setup Command > prompt, type reset and press Enter. This will initiate a reset of the
PIVD100R and may also initiate a reset of one or more STBs, if required. Once the PIVD100R
is reset (may take up to 90 seconds), it may then take up to 10 minutes for the PIVD100R
to reestablish communication with the STBs. After the system reset, the PIVD100R resumes
normal operation.

Update Menu Commands

The following subsections describe how to access and use the Update Menu commands.
Access the Update Menu
1. Log in to the PIVD100R as described on page 37.
2. At the Command > prompt, type update and press Enter.
3. At the Update Command > prompt, either:
• Press Enter to display the Update Menu (see example on following page).
• Type the desired command and press Enter.
Note: You can always press Enter at the Update Command > prompt to display the
Update Menu.
56
206-4202