Pro:idiom Menu Commands - LG CodePlus PIVD100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
Configure the Update Server
1. At the Update Command > prompt, type ucfg and press Enter.
2. At the Enter update protocol (ftg or tftp) [ftp]: prompt, either press Enter
to accept the default value (i.e., the current setting) in square brackets or type the new
update protocol to use (ftp or tftp) and press Enter.
3. At the Enter update host IP address [136.166.60.106]: prompt, either press
Enter to accept the default value in square brackets, or type the IP address of the PIVD100R
and press Enter.
4. (FTP only) At the Enter update user name [update]: prompt, type the name for the
update user.
5. (FTP only) At the Enter update user password [update]: prompt, type the pass-
word for the update user.
Exit the Update Menu
At the Update Command > prompt, type exit and press Enter to exit the Update Menu and
return to the PIVD100R Main Menu Command > prompt.

Pro:Idiom Menu Commands

The following subsections describe how to access and use the Pro:Idiom Menu commands.
Access the Pro:Idiom Menu
Note: You will need to know the Pro:Idiom password to enter this menu. If this is the first time
the menu is being accessed, contact LG for the password. Otherwise, if necessary, obtain the
password from the system administrator.
1. Log in to the PIVD100R as described on page 37.
2. At the Command > prompt, type pi and press Enter.
3. At the Enter PI password > prompt, type the Pro:Idiom password and press Enter.
4. At the P:I Command > prompt, either:
• Press Enter to display the Pro:Idiom Menu (see example on following page).
• Type the desired command and press Enter.
Note: You can always press Enter at the P:I Command > prompt to display the Pro:Idiom
Menu.
58
206-4202