@.OPERATION SECTION (WITH REGARD TO THE PANEL)
2. WHEN USING IP-420
2-31. Name embroidering mode
The name embroidering mode is provided to enable sewing of a pattern data created using the continu-
ous individual-name input function of the PM-3. The name embroidering mode has the following charac-
teristics:
• Sewing can be started with a desired name in the pattern data.
• Every time the sewing machine fi nishes embroidering of one name, it lifts the presser foot.
• The machine is able to sew a pattern which is created using any programming device other than the
PM-3. In this case, the sewing machine regards a section of pattern data bounded by pauses as one
name.
• Under the embroidery mode, both the needle and presser foot stop at their upper ends at all pause
commands.
• Under the embroidery mode, the pattern button is disabled.
• Under the embroidery mode, combination stitching is disabled.
• Under the embroidery mode, simplifi ed operation mode is disabled.
– 4 –