Table of Contents
Advertisement
6. OPERATION OF THE SEWING MACHINE (ADVANCED)
6-1. Performing sewing using the pattern keys
Patterns (No.1 to 200) which have been already registered can be registered to P1 to P50. It is also possible
to register the existing direct pattern with its scale, maximum sewing speed limitation and sewing position
changed. The direct pattern can be selected by scrolling the pattern number in the same manner as the pat-
tern number (No. 1 to No. 200). In addition, patterns P1 to P25 can be called up with the touch of a button.
* When selecting P6 to P25, perform the selection by combination (simultaneous pressing) of
and
P-No. Selection key P-No. Selection key P-No. Selection key P-No. Selection key
P1
P1
P2
P2
P3
P3
P4
P4
P5
P5
P6
P1+P2
P7
P1+P3
(1) Register to the pattern key
Setting example : Register following settings to the P2: Pattern No. 3; X scale rate: 50 %; Y scale rate: 80
%; maximum sewing speed limitation: 2000 sti/min; pattern position: 0.5 mm to the right
and 1 mm to the front.
❷
keys as shown in the table below.
P8
P1+P4
P9
P1+P5
P10
P2+P3
P11
P2+P4
P12
P2+P5
P13
P3+P4
P14
P3+P5
❽
❻
❹
❻
❼
❾
❹
P15
P4+P5
P22
P16
P1+P2+P3
P23
P17
P1+P2+P4
P24
P18
P1+P2+P5
P25
P19
P1+P3+P4
P20
P1+P3+P5
P21
P1+P4+P5
1) Turn ON the power switch and press MODE key
❹ to enter mode setting (memory switch
setting). (SET READY LED should be put out.)
Press ITEM SELECT key
Direct pattern registration" to the selected state.
Press EDIT key
registration mode.
2) Press ITEM SELECT key
standard pattern to No. 3. Press DATA CHANGE
❼ to set P-No. to 2.
key
When you press the READY key
is registered and the mode screen is displayed.
Press MODE key
❾ .
*
When the select key is held pressed for one
second in the state where the standard pattern or
user pattern is selected on the data input screen,
this screen can be displayed.
－
－
26
P2+P3+P4
P2+P3+P5
P2+P4+P5
P3+P4+P5
❻ to bring "04.
❽ to display the pattern
❻ to set the
❷ , P2
❹ or RETURN key
Advertisement
Table of Contents
