Performing Needle Thread Trimmer Origin Adjustment - JUKI IP-310/ACF-172-1790 Instruction Manual

5-3-2. Performing needle thread trimmer origin adjustment

1 Display the needle thread trimmer origin
adjustment screen.
When NEEDLE THREAD TRIMMER ORIGIN
ADJUSTMENT button
needle thread trimmer origin adjustment screen
is displayed.
2 Perform the needle thread trimmer origin
adjustment.
When OPERATION button
the needle thread trimmer is actuated to the
positions below and the pictograph showing the
position is displayed in gray.
C : Thread holding position
(Initial value : 0 pulse)
D : Release position (Initial position : - pulses)
E : Waiting position (Initial position : 0 pulses)
F : Thread trimming position
(Initial position : 0 pulses)
Data of the respective positions can be changed
with - or + button
When ORIGIN RETRIEVAL button
pressed, origin retrieval can be performed from
any position.
When CANCEL button
contents of change can be memorized in
EEPROM of the machine head and the screen
returns to the check program.
＊ For the details of adjustment, refer to the
Engineer's Manual for LBH-10.
(A) is pressed, the
(B) is pressed,
(G • H).
(I) is
(J) is pressed, the
− 130 −
A
D
E
G
H
J
C
I
F
B