(3) Setting the thread tension
The needle thread tension and the looper thread tension can be changed respectively.
The thread tension becomes stronger by increasing the set value, or weaker by decreasing it.
Refer to
"7. SETTING PROCEDURE OF THE SEWING DATA" P.25
It is also possible to compensate the thread tension so that it changes in accordance with the sewing
points.
Refer to
"9.(2) Operating procedure of thread tension compensation of each section" P.45
details.
The actual thread tension varies with the type and thickness of the thread used even when the
set value is same. Set the thread tension in accordance with the thread you want to use. Higher
thread tension may cause stitch skipping.
3) Press
❹
4) Press
❸
5) Press
tern.
❺
- 19 -
❸ to display S039.
❹ to display P05.
❺ to complete copying of the pat-
for details.
for