Table of Contents
Advertisement
6-3. Performing communication by using USB
6-4. Take-in of the data
B
A
C
Data can be sent/received to/from a personal com-
puter or the like, by means of a USB cable.
① Display the communication screen.
When communication switch
pressed in the data input screen, the communication screen is
displayed.
② Select the kind of data.
When data selection button
tion screen is displayed.
Select button (C) of kind of data to be communicated. The select-
ed button is displayed in reverse video.
③ Determine the kind of data.
When ENTER button
tion screen is closed and the selection of the kind of data has
been completed.
D
− 134 −
If the contact part becomes dirty, failure
of contact will be caused. Do not touch
by hand, and control so that dust, oil or
other foreign material does not adhere to
it. In addition, the inside element is dam-
aged by static electricity or the like. So,
be very careful when handling.
(A) of switch seat section is
(B) is pressed, the data selec-
(D) is pressed, the kind of data selec-
Advertisement
Table of Contents
