Esi Enable Operation; Esi Data Paths - HP NetServer AA 6200 Administrator's Manual

ESI Enable Operation

This command enables a faulted ESI (Endurance System Interconnect).
Command ESIn Enable Operation From IOPx
Console Syntax MTCCONS ESIn Enable Operation From IOPx
n – the ESI's ID number:
Variables
ESI ID Number
11
12
21
22
x – the ID number of the IOP (1 or 2)
Check the Windows Event Viewer on the CE for the following message:
Results
Commands
Table 5-5 ESI Data Paths
IOPx.MtcMon status: ESIn has been enabled by operator
.
request
Data Path Between . . .
IOP1 and CE1
IOP1 and CE2
IOP2 and CE1
IOP2 and CE2
5-19