Define Compute Node Inventory Data Collection For Consistency Checks - HP 1032 Manual

Back to Top

1.6.9 Define Compute Node Inventory Data Collection for Consistency checks

Scheduling Data Collection tasks are done using the HP System Management Tools:
Using the HPSIM GUI
To create a Data Collection task using HPSIM GUI, do the following:
Select "Options", then click on "Data Collection". The Data Collection page
appears.
Select the node(s) and/or node group to install on.
Specify how to save data after data collection.
Select one of the following options to execute the task:
References:
3.9.4 How to run HPSIM Web-based GUI
Using the SCM GUI:
To define Compute Node inventories for consistency checks, use the SCM GUI to access the
Systems Inventory Manager GUI.
Select one or more nodes.
Under "Tools", select "System Inventory", and then click "SysInvMgr portal".
This launches the Systems Inventory Manager GUI.
Using the Systems Inventory Manager GUI:
References:
Click [Schedule] to schedule when the task should run.
Click [Run Now] to run the task now.
Log in as "admin".
Select the "Filter" folder.
Click on "Create Filter".
Select a name to uniquely identify the inventory filter.
Enter an optional description.
Select one or more categories (e.g. System, Memory, I/O
Devices).
Select one or more Groups from the selected categories (e.g.
BundleContents, LogicalMemory).
For fine control over inventory collection, use "Advanced
Settings" to select or unselect specific items.