Channel Strip (Input Channel) - Roland M-5000 Reference Manual

Channel Strip (Input Channel)

Input patchbay
Meter
INPUT
DYNAMICS 1
DYNAMICS 2
EQ
MISC
SENDS
PAN/ROUTING
Knob section area
NAME
DCA/MUTE GROUP
Input patchbay
Meter
INPUT
DYNAMICS 1
DYNAMICS 2
EQ
MISC
SENDS
PAN/ROUTING
Knob section
area
NAME
DCA/MUTE GROUP
Process view
Displays the channel number and input source as set in the patchbay.
Displays the signal level.
The level detection position is selected on the METER SETUP popover.
0"METER SETUP Popover" (p. 132)
Displays the status for preamp gain, phantom power, pad, and polarity.
Tapping displays the CH EDIT window INPUT tab.
Displays general characteristics for DYNAMICS.
Tapping displays the CH EDIT window DYNAMICS tab.
Memo
The order in which DYNAMICS 1/2 and EQ are displayed depends on the routing for DYNAMICS 1/2 and EQ.
Display general characteristics for EQ.
Tapping displays the CH EDIT window EQ tab.
Memo
The order in which DYNAMICS 1/2 and EQ are displayed depends on the routing for DYNAMICS 1/2 and EQ.
Displays the status of Channel Delay, Recall Safe, Direct Out, or Insert A/B.
Tapping displays the CH EDIT window MISC tab.
Displays the status of send levels to AUX buses.
Tapping displays the CH EDIT window SENDS tab.
Displays the status of Pan, Subgroup, or Mix-Minus.
Tapping displays the CH EDIT window PAN/ROUTING tab.
These are parameters assigned to the knob section on the top panel. Assigned parameters are set in the knob-assign area on the
sidebar.
0"Knob-assign Area" (p. 134)
Displays the channel name and channel color.
To change the channel name or channel color, double-tap or long-tap this.
Displays the DCA group/Mute group status.
Tapping displays the CH EDIT window DCA/MUTE GROUP tab.
Input patchbay
Meter
INPUT
PAN/ROUTING
Knob section area
NAME
DCA/MUTE GROUP
Meter view
HOME Screen
95