Mitsubishi Melsec-Q QD75P1 User Manual page 276

7 MEMORY CONFIGURATION AND DATA PROCESS
The data transmission is carried out as shown in the previous pages, but the main
method of using this data process is shown below.
(Ex.) Setting the positioning data
The following methods can be used to set the positioning data.
From peripheral device
Set the data according to the
peripheral device menu.
Write the data set with the
peripheral device into the
buffer memory.
Using sequense program
Write positioning data into buffer
memory using TO command.
Completion
User work
QD75 state
7 - 12
MELSEC-Q