Mr Configurator (Servo Configurations Software) - Mitsubishi Electric MR-J2M-P8B Instruction Manual

12. OPTIONS AND AUXILIARY EQUIPMENT

12.1.4 MR Configurator (servo configurations software)

The MR Configurator (servo configuration software) uses the communication function of the interface unit
to perform parameter setting changes, graph display, test operation, etc. on a personal computer.
(1) Specifications
Item
Communication signal
Baudrate [bps]
Monitor
Alarm
Diagnostic
Parameters
Test operation
Advanced function
File operation
Others
(2) System configuration
(a) Components
To use this software, the following components are required in addition to MELSERVO-J2M and
servo motor:
Model
IBM PC-AT compatible where the English version of Windows
Windows NT
Processor: Pentium
(Note 2)
Personal
computer Memory: 16MB or more (Windows
Free hard disk space: 60MB or more
Serial port used
Windows
OS
(English version)
One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Display
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer. Note that a serial mouse is not used.
Printer Connectable with the above personal computer.
Communication MR-CPCATCBL3M
cable When this cannot be used, refer to (3) Section 12.1.2 and fabricate.
Note 1. Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
Pentium is the registered trademarks of Intel Corporation.
2. On some personal computers, this software may not run properly.
POINT
Required to assign devices to the pins of CN4A and CN4B of the MR-
J2M-D01 extension IO unit.
Batch display, high-speed display, multiple axis display, graph display
Minimum resolution changes with the processing speed of the personal computer.
Alarm display, alarm history, alarm occurrence time
I/O display, function device display no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, ABS data display, shaft
Parameter setting, list display, change list display, detailed display, turning, Device setting,
Jog operation, positioning operation, motor-less operation, DO forced output, program operation.
Machine analyzer, gain search, machine simulation.
® Workstation 4.0 or Windows
® 133MHz or more (Windows
Windows ® 2000 Professional)
Pentium ® 150MHz or more (Windows
32MB or more (Windows
® 95, Windows ® 98, Windows
www.dadehpardazan.ir 88594014-15
Description
Conforms to RS-232C.
57600, 38400, 19200, 9600
name setting, unit composition list display.
parameter (IFU), parameter (DRU).
Data read, save, print
Automatic operation, help display
(Note 1) Description
® 2000 Professional operates
® 95, Windows
® Me)
® 95), 24MB or more (Windows
® ®
Me, Windows NT Workstation 4.0, Windows
® Me, Windows NT ® Workstation 4.0, Windows
12 - 23
® 95, Windows ® 98, Windows
® 98, Windows NT ® Workstation 4.0,
® 98)
®
2000 Professional)
® 2000 Professional
® Me,