Mitsubishi Electric Melservo-J2-JR SERIES Instruction Manual page 145

12. OPTIONS AND AUXILIARY EQUIPMENT
(2) Motor cable
CAUTION
Generally use the encoder cable available as our options. If the required length is not found in the
options, fabricate the cable on the customer side.
Servo Motor Model
HC-AQ0135D
to MR-JRCBL M-H
HC-AQ0335D
Note:1. indicates the cable length: 2, 5, 10, 20, 30(m).
2. The standard cable has a long flexing life.
(a) Model explanation
Model: MR-JRCBL M-
Symbol
10
20
30
(b) Outline drawing
A
View A
If you have fabricated the motor cable, connect it correctly.
Otherwise, misoperation or explosion may occur.
POINT
The encoder cable is not oil resistant.
Refer to section 11.3 for the flexing life of the motor cable.
Motor Cable
(Note 1) Model Use for EN/UL Standard
Long flexing life
Cable Length [m]([ft])
2 2(6.5)
5 5(16.4)
10(32.8)
20(65.6)
30(98.4)
(Note 2)
Long flexing life
l
12 - 3
Connector Set
MR-JRCNM
B
View B