Model Code Definition; Combination With Servo Motor - Mitsubishi Electric Melservo-J2-JR SERIES Instruction Manual

1. FUNCTIONS AND CONFIGURATION
Function
Servo configuration
software
Alarm code output
Note:P: Position control mode, S: Speed control mode, T: Torque control mode
P/S: Position/speed control change mode, S/T: Speed/torque control change mode, T/P: Torque/position control change mode

1.3 Model Code Definition

(1) Rating plate
(2) Model

1.4 Combination with Servo Motor

The HC-AQ series servo motors can be used. The same combinations apply to the servo motors provided
with electromagnetic brakes and reduction gears.
Using a personal computer, parameter setting, test
operation, status display, etc. can be performed.
If an alarm has occurred, the corresponding alarm number
is output in 3-bit code.
MR-J2 - 03 A 5
Series name
Rated output 30[W]
Servo Amplifier Servo motor
HC-AQ0135D
MR-J2-03A5 HC-AQ0235D
HC-AQ0335D
Description
Model
Capacity
Applicable power supply
Rated output current
Serial number
24VDC power supply specification
General-purpose interface
1 - 3
(Note)
Refer To
Control Mode
P, S, T Section 12.1.3
P, S, T Section 9.2.1
Rating plate